Encoder sensor (Industrial parts)

> Products information > Encoder sensor (Industrial parts)

KH100 Series

Elevator
Parking system
Industrial motor used
Easy to be attached
Customized design
Prompt delivery

Features

Elevator

Industrial motor used

Easy to be attached

Customized design

Prompt delivery

Model

External Dimension

Output Circuit

Open Collector

Complemental

Totem pole

Line Driver

Specification

Electrical Spec

Output type	Open Collector	Complemental	Totem Pole	Line Driver
Power Supply	DC +15[V] ~ +15[V] Ripplep-p:less than 5%	DC +15[V] Ripplep-p:less than 5%	DC+5[V]~+15[V] Ripplep-p:less than 5%	DC +5[V] Ripplep-p:less than 5%
Consuming Current (In case of no load)	70mA Max	150mA Max	150mA Max	150mA Max
Maximum Response Frequency	150 KHz
Output voltage	Less than VL 0.5[V] / More than VH 2.5[V] (In case of inputting +5[V]), More than VH10[V] (In case of inputting +15[V])
Output current	Less than 20mA	Less than 10mA	Less than 10mA	Less than 20mA
Rising, decline time	Less than 3μs	Less than 1μs	Less than 1μs	Less than 0.1μs
Common conditions	In case that the cable length of output side is 1[M] and load resistance is less than 1[kΩ]

Mechanical Spec

Starting Torque	800gf – cm Max
Maximum number of revolution	3000 rpm
Bearing lifetime	50,000[hr] (In case of rotating by 3000rpm)
Allowable Shaft Load	Radial : 5.0kgMax Axial : 2.5kgMax
Position deflection of allowable shaft	Radial : Less than 0.05 mm Axial : Less than 0.2mm
ConnectionTable	DC16-07RN
weight	1.2kg

Output Phase Shift

a + b, c + d = T/2 ± T/10
a , b , c , d = T/4 ± T/10

Rigid Spec

Connection Table

PIN NO	Color	Output Signal
Output Form		Open Collector Complemental Totem Pole	Line Driver
1	Red	Vcc	Vcc
2	Black	GND	GND
3	Green	A Sig	A Sig
4	Orenge	A Sig GND
5	Yellow	B Sig	B Sig
6	White	B Sig GND
7	Shield	CASE Shield	CASE Shield

List